Tenn Chem-Granite Super is a structural grade adhesive designed for mortaring threaded rods and rebars to concrete.
Tenn Chem-Granite Super is a structural grade adhesive designed for mortaring threaded rods and rebars to concrete.
Based on acrylated epoxy resin, Chem-GraniteSuper is a special formulation optimised for bond strength, cure speed and creep resistance. It combines into one product all the advantages found in traditional epoxy and polyester adhesives.
Tenn Chem-Granite Super is presented in special pump cartridges of 380 ml capacity. Pre-measured amounts of epoxy acrylafe resin and a resin hardener are housed in separate compartments inside the cartridge. Thecartridge manifold is threaded to accept a screw-on nozzle. Using a special dispensinggun, the chemical components are co-extruded into the nozzle where they are blended to form the Chem-Granite Super mortar.
An anchorage is made by injecting the mixed Chem-Granite Super adhesive to fill between 1 /2 to zla of the hole. The anchor (threaded rod or racer) is hand-rotated into the mortar until reaching the bottom of the hole. The twisting motion centers the anchor, distributes and packs the mortar onto the surfaces of the tabor and the wall of the hole. The mortar cures quickly to solidly bond the rebar to the surrounding concrete mass.
| • | Aggressive bonding mortar |
| • | Insensitive to vibration |
| • | Insensitive to moisture, may be used in damp or wet holes |
| • | Resistant to a wide range of commonly encountered chemicals, including acids |
| • | Reliable nozzle mixing |
| • | One cartridge for all sizes of refer |
| • | Predictable and calculable performance |
Advantages
| • | Gains working strength in 45 minutes |
| • | Fast installation time -gells in 5 minutes at 25°C |
| • | Exceptionally high pull-out strengths |
| • | No special measuring or mixing equipment needed. Use with standard dispensing gun |
| • | Cured Chem-Granite Super adhesive is non- toxic, does not dissolve in water-suitable for use in water supply projects |
Where To Use
Application
• Anchoring debar, bolts, threaded rods, railings and pipes
Substrate
• Concrete, solid brickwork and rock
Location
• Horizontal. vertical and overhead surfaces.
• Interior or exterior
For more information, please get in touch with us at : (603) 8941 3413 or Click Here For Our Enquiry Form.
B+BTEC VDP/ThunderRods
For over thirty years, B+BTEC VDP Spin Capsules have been an indispensable tool in concrete construction.
B+BTEC HaC Hammer Capsules
HaC Hammer Capsules are still the easiest and fastest way to achieve safe anchorage of rebar dowels in concrete or rock.
Tenn Chem-Granite Super
Tenn Chem-Granite Super is a structural grade adhesive designed for mortaring threaded rods and rebars to concrete.
Tenn PK Wedge Anchors
Providing a secure, heavy-duty insitu anchorage for attachments to concrete, Tenn PK Wedge Anchors give complete support in shear for a stronger fastening against dynamic side loads, and are specifically designed for quick and ready installation.
Tenn STA Scaffold Tie Anchor
Tenn STA Scaffold Tie Anchor consists of two parts:
1) a Tenn Dakota Plug which is secured in the building structure.
2) a removable steel ringbolt which screws into the Dakota Plug to provide the connection to the scaffold tubes.
Tenn TFP Frame Anchors
Tenn TFP Frame Anchors are designed to speed up on-site assembly operations. They make it easy to fasten aluminium frames, timber battens, wooden door and window frames, wall cabinetry etc. to concrete and solid brickwork.