Tenn JSB Sleeve Anchors

JSB Sleeve Bolt is a heavy duty sleeve-type anchor designed.for bolt-on connections to concrete. It is also suitable for use in concrete block and solid brickwork.

22-Tenn-JSB-Sleeve-Anchors

 

JSB Sleeve Bolt is a heavy duty sleeve-type anchor designed.for bolt-on connections to concrete. It is also suitable for use in
concrete block and solid brickwork.

The hex head gives a visually attractive fi nished appearance to the attachment.

The anchor is tapped into a predrilled hole through clearance holes on the fi xture’s baseplate.

Tightening the bolt draws the cone nut into the sleeve, causing it to deform. The sleeve is slotted so that it deforms readily.
This action prevents the bolt from prestressing before the attachment is properly clamped.

• Embedment depth, anchor-to-anchor spacing, anchorto-edge distance, base material compressive strength and thickness needed to generate maximum anchor capacity are shown in Table 1.
• Drill-holes must be drilled 1) using carbide drill bits thathave the same nominal diameter as the anchor sleeve,and 2) deep enough for required embedment depth.
• Drill dust should be blown out of the hole.
• Tighten the bolt to the recommended tightening torques.

For more information, please get in touch with us at : (603) 8941 3413 or Click Here For Our Enquiry Form.

pdf-100

Leave a Reply