TENN SCI is an internally threaded steel anchor for use in precast, prestressed and poured-in-place concrete. It is placed in the formwork prior to the casting
of concrete. After the concrete is cured, SCI provides a socket fastening point for attachment of threaded rods, bolts, eye bolts, etc.

SCI’s hexagonal foot transfers the load into the concrete. High working loads
are achieved even with relatively short anchor length. For extra strength, a bar
can be inserted into the cross hole.

• Designed for pre-planned fastening in heavily reinforced concrete. Pre-planned location of inserts avoids the diffi culties
of drilling hard concrete and the high costs associated with installation of post-installed anchors.
• Installed with bolts through holes in steel or wood formwork.
• Dependable, split-free anchorages.
• Suitable for dynamic loading conditions.
• May be used in the tension zones of concrete.
• No expansion stresses – therefore allowing closer edge distance and spacing.

General Applications and Uses

Precast concrete construction: as a cast-in lifting socket for transporting wall and fl oor slab, fascia panels, etc.
A reinforcement bar must be inserted through the cross hole to ensure the proper transmission of the load from
the socket into the concrete. Check that the required concrete strength has been attained prior to lifting.

Poured concrete construction: as a cast-in socket in multi-storey buildings using plywood or metal deck
formwork for fl oors. SCI is bolted to the forms (A) before pouring of concrete. After the concrete is set,
the socket provides easy attachment for threaded rods that carry the racks for pipework, cable trays,
bus ducts, HVAC dusts, electrical conduits (B).

For more information, please get in touch with us at : (603) 8941 3413 or Click Here For Our Enquiry Form.