Tenn Jackbolt Sleeve Anchors
Jackbolt Sleeve Anchors are torque-set through- bolts and are designed for use in concrete and solid brickwork. Their high taper base generates expansion over a larger contact surface area to give high performance anchorage.
Tenn HLB High Load Anchors
Made from top grade steel for strength and durability, the Tenn HLB High Load Anchor is designed to achieve the highest clamping loads and secure load bearing anchorage in hard concrete.
Tenn DNA Nail Anchors
TENN DNA Nail Anchor is a hardened steel nail enclosed in a shell made of Zamac 3 material, a non-rusting Al/Zn/Cu alloy.
Tenn Frescon Frame Plugs
Tenn Frescon Frame Plugs are designed to speed up on-site assembly operations. These plugs make it easy to fasten timber battens, aluminium or wooden door and window frames, wall cabinetry etc. to brickwork and concrete. With Frescon plugs, there is no need to mark out the drill-hole locations; the anchor holes can be drilled through the clearance holes in the attachments.
Tenn UMA
Tenn UMA is designed to anchor into and provide high loads in the most challenging base materials, such as ALC, hollow or perforated brick and concrete block, lightweight concrete, aged or brittle concrete, etc. In these base materials UMA does the job when others totally fail.
Tenn PFA Drop-In Anchors
Tenn PFA Drop-In Anchors are internally threaded expansion anchors designed to provide a dependable socket fixing point in hard concrete. They are most frequently used in ceilings in combination with threaded rods.
Tenn CXE & MXE Alligator Plugs
The Tenn Alligator Hammer-in Plug combines a screw-nail of the correct diameter and a thick-walled sleeve made of Polyamide 6-6 to provide a hammer-in plug with dramatically increased holding power compared to other hammer plugs.
Tenn Spring Hangers
Tenn Spring Hanger are cast-in-place sockets designed to provide reliable attachment points for bolts and drop rods for overhead suspensions e.g. for ceilings, pipework and mechanical services.
- 1
- 2